鋁基板分板機設備在運行過程中出現問題是正常的，對于工廠來說，延長設備的使用壽命是很重要的。設備的維護不僅是為了提高其使用壽命，也是為了保證其工作質量。隨著市場的發展。現在SMT、鋁基板A組裝，已經基本實現了自動化鋁基板分板機代替人工分板。 It is normal for aluminum plate splitter to have problems during operation. It is very important to extend the service life of the equipment for the factory. Equipment maintenance is not only to improve its service life, but also to ensure its work quality. With the development of the market. Now SMT, aluminum substrate a assembly, has basically realized the automatic aluminum plate splitter instead of manual plate. 鋁基板分板機一般主要用于鋁基板A加工廠。其目的是取代傳統的手工折板，提高生產效率，保證產品質量。乍一看，人們會覺得鋁基板分板機操作很復雜，然而，在實際應用中，無論是哪種鋁基板分板機，其應用原理都不像我們想象的那么復雜。 Aluminum plate splitter is generally used in aluminum substrate a processing plant. Its purpose is to replace the traditional manual folding plate, improve production efficiency and ensure product quality. At first glance, people will feel that the operation of the aluminum substrate splitter is very complicated. However, in practical application, the application principle of any aluminum substrate splitter is not as complicated as we imagine. 鋁基板分板機使用注意事項如下： The precautions for the use of aluminum substrate splitter are as follows: 1、當然，鋁基板分板機在設計結構時，除了經銷商、制造商對于安全的考慮之外，在實際操作過程中，工作人員在打開鋁基板分板機電源之前，應首先仔細檢查上下切刀之間的間距。分配器使用期間，嚴禁將手放入機器。在機器運行的任何情況下，葉片周圍的保護板都不應拆除，以免發生事故。此外，鋁基板分板機僅用作分板使用，不能用于其他目的。在整個使用過程中，必須做好靜電防護，工作人員在工作前必須戴好防靜電手環才能開始作業。 Of course, when designing the structure of the aluminum plate splitter, in addition to the safety considerations of the distributors and manufacturers, in the actual operation process, before turning on the power supply of the aluminum substrate splitter, the staff should first carefully check the spacing between the upper and lower cutters. Do not put your hands into the machine during the use of the distributor. In any case of machine operation, the protective plate around the blade should not be removed to avoid accidents. In addition, the aluminum substrate splitter is only used for plate separation, and cannot be used for other purposes. In the whole use process, we must do a good job in electrostatic protection, staff must wear anti-static Bracelet before starting work. 2、在使用分板機時，工作人員必須將鋁基板板分割槽放在放在固定刀座，并將鋁基板分板機置于水平位置移動，在操作機器的時候不要穿著過于寬松的衣服，長頭發必須扎起來，以免意外事件發生。 When using the distributor, the staff must put the aluminum plate cutting groove on the fixed knife base, and move the aluminum plate splitter in a horizontal position. Do not wear too loose clothes when operating the machine, and tie up long hair to avoid accidents. 3、當使用鋁基板分板機時，工作人員必須將電路板分割器槽放置在固定刀架上，并將電路板分割器移動到水平位置。操作機器時不要穿太寬松的衣服，長發必須扎起來，以免發生事故。 When using the aluminum plate splitter, the staff must place the circuit board divider slot on the fixed tool holder and move the circuit board divider to the horizontal position. Do not wear loose clothes when operating the machine. Long hair must be tied up to avoid accidents. 4、在鋁基板分板機停止工作期間，工作人員應注意維護工作，隨時注意保護上下刀定位板和上下刀刃，清理機器的表面和內部碎屑，并隨時檢查機器螺絲的緊固情況。若是機器長時間不工作，還應拆下上下定位板，上下刀具應涂上油以保護它們，使用前可將其擦掉。此外，在使用鋁基板分板機之前，還需要檢查電路是否損壞。 During the period when the aluminum substrate splitter stops working, the staff should pay attention to the maintenance work, protect the upper and lower tool positioning plates and upper and lower blades at any time, clean up the surface and internal debris of the machine, and check the fastening of the machine screws at any time. If the machine does not work for a long time, the upper and lower positioning plates should also be removed. The upper and lower cutters should be coated with oil to protect them. They can be wiped off before use. In addition, before using the aluminum substrate splitter, it is also necessary to check whether the circuit is damaged. 5、此外，鋁基板分板機日常檢修和維護必須在平時進行。操作之前要看刀片是否松動，以避免操作過程中出現事故。若是鋁基板分板機出現異常并需要檢修，首先確保電源線與插座分離，然后才可進行操作，以避免引發觸電危險。 In addition, the daily repair and maintenance of aluminum substrate splitter must be carried out at ordinary times. Before operation, check whether the blade is loose to avoid accidents during operation. If the aluminum substrate splitter is abnormal and needs to be repaired, first ensure that the power line is separated from the socket, and then the operation can be carried out to avoid the risk of electric shock.
中文版 
English1
