使用走刀式分板機操作注意事項
1、整個進程有必要做好防靜電保護；
It is necessary to do a good job of anti-static protection in the whole process;
2、分板進程中，嚴禁將手伸進機器；
It is strictly forbidden to put your hand into the machine in the process of plate splitting;
3、翻開電源后，斷定行程后有必要保證關于的指示燈不在苫蓑；
After turning on the power supply, it is necessary to ensure that the relevant indicator light is not covered after the trip;
4、有必要將PCBA的槽卡在刀片上，并將PCBA水平放置；
It is necessary to clamp the PCBA slot on the blade and place the PCBA horizontally;
5、腳踩開關，直至刀片運轉中止才可松開；
Step on the switch until the blade stops running;
中文版 
English1
